If your Honeywell Pro Series thermostat fan won’t turn off, it could be caused by a few different issues.
First, check that the fan switch on the thermostat is set to auto rather than on.
If it’s already set to auto and the fan still won’t turn off, you should try resetting the system or replacing its batteries if necessary.
Additionally, there may be an issue with your HVAC system itself and you may need a professional technician to service it in order for the fan to turn off properly.
For example, if something is preventing proper airflow in the ventilation ducts or cooling coils are dirty/frozen, this can prevent air from circulating which can cause overheating in some cases and prevent fans from turning off as expected.
![Honeywell Pro Series Thermostat Fan Won'T Turn off [Solved] 1 Honeywell Pro Series Thermostat Fan WonT Turn off](https://smartacsolutions.com/wp-content/uploads/2023/10/Honeywell-Pro-Series-Thermostat-Fan-WonT-Turn-off-1024x651.jpg)
How Do I Turn off the Fan on My Honeywell Thermostat?
Turning off the fan on your Honeywell thermostat is simple and straightforward.
To start, locate the switch on the side of your thermostat that controls the fan.
Depending on what type of system you have, this switch may be labeled “On/Auto” or simply “Fan”.
If it says “On”, flip it to “Auto”; if it says “Fan”, turn it to “Off”.
If there are no labels at all, then flick the switch toward its middle position (which will turn off most systems).
Once you’ve made sure that the fan is turned off, press down gently on any buttons or knobs around your thermostat until a light appears – this indicates that you’ve successfully adjusted your settings.
Finally, check for airflow from vents in rooms near where your thermostat is located – if there’s still air coming out even though you’ve switched off the fan setting, try flipping other switches as well before consulting a professional technician for advice.
With just a few simple steps, turning off your Honeywell thermostat fan can be done quickly and easily!
How Do I Reset My Honeywell Pro Series Thermostat?
Resetting your Honeywell Pro Series thermostat is a simple process that can be completed in just a few steps.
First, locate the reset button on the side of the device.
This will usually be located towards the bottom right-hand side of the thermostat panel.
Next, press and hold down this reset button for at least three seconds before releasing it.
After you have successfully pressed and held down the reset button for three seconds, your thermostat should automatically reboot itself and begin to re-configure its settings back to their original state.
Once complete, your Honeywell Pro Series thermostat should now be fully operational and ready to use again!
Honeywell Thermostat is off But Fan Keeps Blowing
If you have a Honeywell Thermostat and it is off, but the fan in your home is still blowing, then this could be due to a few different things.
Firstly, if the thermostat has been wired incorrectly or if there are any loose connections in the wiring between the thermostat and furnace, then this will cause continuous airflow from your fan even when it’s turned off.
Additionally, some older models of Honeywell Thermostats may also have an internal switch that keeps on running even after being shut down – so check for that as well.